Block 2

A quick and simple block for us.  :)

Here everything is set out and ready to go.  You'll notice that the first set for square-in-a-square I used a different method.  The centre square isn't an even measurement so I used the squares method instead of the triangles method for the first round.

Here is the first square-in-a-square...

And the second....

And the third....

And finally the last border has been added.

Something to make our slightly shorter week a little simpler.

Late!

I ended up with surprise plans this weekend and no time left to make a block. I'll be doing that tonight and posting something then.

Sorry, this one will be late.

Block 89

After last week, I figured we really needed a simple block.  This is another one of our edge blocks, so don't be too worried about the colours.  Once again, the brights are for the method - make the block and slice it in half.  The red and whites are for the method - make the block as two separate triangles.

Here is everything a laid out and ready to go.

Here I've sewn the centre 4-patch and put posts (the white) on the striped border.  (Yes, I chain piece where ever possible)

Here the centre 4-patch becomes the centre of a square-in-a-square block.

The next border added.

And one last square-in-a-square later and we have our block!

Here is everything all laid out if you are making the two triangles (aka - you want the seam allowance)

I added the triangles to the centre square to create the centre triangles.  Plus I added the posts to the maroon rectangles.

Here are the red triangles added, making  funky flying geese.

Now the next border added.

And finally the outer triangles.

I hope this one is much smoother than last week's...

Block 45

This block looks daunting at first but it's not so bad.  There are just a lot of pieces to keep track of.  I'm not sure if you can see it in the picture below, but I assigned each piece a number, value, and direction.  The diamonds are almost, but not quite the same size in each direction.  I also did this block using templates.  The diamonds are an odd size in one direction.  I really couldn't see a way to make this easier by paper piecing but if anyone can see it, please let me know.

 

Here is everything set out and ready to go.  If you notice on the corners, I've sewn the 1/2 square triangles and just put a template on the one half.  I left the paper on throughout just to help keep track of the pieces.  I was debating whether or not to do this one by hand but in the end went with the machine.

The trick to this one is to pay attention to the way you press your seams.  Make sure they're pressed to the opposite sides.  This will make your piecing easier and minimize the bulk in the seams.

Here we are with the first pairs of diamonds.

Now the pairs of diamonds are together.  Again, paying attention to the way you press your seams.

This time when I pressed the seams, I chose to go clockwise.  This will minimize some of the bulk in the middle.  When you are sewing these sets together, it is important you end 1/4 from the end of the fabric on the outside corners.  This will make your life much much easier on the next step.

Now we tackle the Y-seams.  I take them in two steps always sewing from the outside to the inside.  This helps to prevent puckers in the fabric and ensures that your corner fabric doesn't stretch out.  Pin your fabric together and mark 1/4 from the end.  Sew up to but not past the pin.  Stopping a thread or two before the pin is better than going slightly over.  Backstitch.  (You need to backstitch in the corner because there will be nothing preventing your seam from unravelling.)

Now you do the same thing for the other side.  Remembering to stop just before the pin and backstitch.  If you notice from the picture below, I fold the fabric out of the way so that I'm not fighting it while sewing.

Press so that the triangle is flat.  If you need to, you can trim a little of the bulk of the seam in the corner to help things lay a little flatter.

Here things are with the 4 corners attached and the 4 pieces put together.  Now attach the middle triangles using the same technique for Y-seams above.

Here is the finished block, ready to go.

And another of the more time consuming ones behind us. :)

Block 39

Okay, this isn't the scary block I was warning you about last week.  I'm still working on that one. :)

This one is essentially a square-in-a-square block surrounded by many borders.  Here is everything all set out and ready to go.

Here I've constructed the square-in-a-square and sewn what I could for the inner and outer borders.  Now we're ready for lots and lots of 'round and 'round the block.

Here is the inner border attached.  (Plus the handle of my rotary cutter managed to sneak in :)

Our middle border attached.

And finally the outer border attached.

Block 47

Another relatively simple block for us.  Warning!!  We're going to have another more complex one coming up soon.  (Don't want to leave them all until the end...)

I ended up paper piecing the triangles on the side.  The measurements were a little off, so paper piecing it is.  Here is everything cut and ready to go.  

The first things I did were make the 1/2 square triangles for the centre pinwheel and attached the posts for the middle border.  (Behind the scenes I did the paper piecing :)

Here things are with the centre pinwheel.

To get the centre of your pinwheel to lie a little more flatly, after you've sewn everything together you can remove the last few stitches of the seam and press you seam so it goes in opposite directions.  You end up with a little baby pinwheel like this:

Here I've attached the middle border and placed out the remaining pieces.  I cut the corner triangles a little larger and trimmed them down after they were attached.  I split the outer border like this to avoid Y-seams. :)

Here it is with the paper pieced triangles attached.

And here is our next block with the corner triangles attached and trimmed!

Block 20

Here are all the pieces set out and ready to go.  You can see, for the corners, I cut rectangles that fit the longest measurement of the point and then trimmed things up when the corner piece was assembled.

Here is a close up of the corner.  One trimmed the other ready for trimming.

Onto the centre.  First I assembled the 4 patch and the outer posts.

Then the 4 patch becomes the centre of a square-in-a-square block.

Then I added the middle, light border.

Then the outer border.  The centre of the block is ready for its corners.

And here is is with the corners attached.